View AUIRL1404L_7255866.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

hexfet ? power mosfet s d g www.irf.com 1 d 2 pak auirl1404s to-262 AUIRL1404L automotive grade advanced planar technology logic-level gate drive low on-resistance dynamic dv/dt rating 175c operating temperature fast switching fully avalanche rated repetitive avalanche allowed up to tjmax lead-free, rohs compliant automotive qualified * features description absolute maximum ratings stresses beyond those listed under ?absolute maximum ratings? may cause permanent damage to the device. these are stress ratings only; and functional operation of the device at these or any other condition beyond those indicated in the specifications is not implied.exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. the thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. ambient temperature (t a ) is 25c, unless otherwise specified. gds gate drain source hexfet ? is a registered trademark of international rectifier. * qualification standards can be found at http://www.irf.com/ parameter units i d @ t c = 25c continuous drain current, v gs @ 10v i d @ t c = 100c continuous drain current, v gs @ 10v a i dm pulsed drain current p d @t a = 25c power dissipation p d @t c = 25c power dissipation linear derating factor w/c v gs gate-to-source voltage v e as single pulse avalanche energy mj i ar avalanche current a e ar repetitive avalanche energy mj dv/dt peak diode recovery dv/dt v/ns t j operating junction and t stg storage temperature range c soldering temperature, for 10 seconds thermal resistance parameter typ. max. units r 0. , , 0.0 ??? 40 w -55 to + 175 c/w 300 (1.6mm from case ) 3.8 1.3 20 5.0 20 520 95 200 max. 160 110 640 specifically designed for automotive applications, this stripe planar design of hexfet? power mosfets utilizes the latest processing techniques to achieve low on-resistance per silicon area. this benefit combined with the fast switching speed and ruggedized device design that hexfet power mosfets are well known for, provides the designer with an extremely efficient and reliable device for use in automotive and a wide variety of other applications. v (br)dss 40v r ds(on) max. 4m i d 160a

2 www.irf.com s d g s d g repetitive rating; pulse width limited by max. junction temperature. ( see fig. 11 ) starting t j = 25c, l = 0.35mh, r g = 25 , i as = 95a. (see figure 12) i sd 95a, di/dt 160a/ s, v dd v (br)dss , t j 175c pulse width 300 s; duty cycle 2%. c oss eff. is a fixed capacitance that gives the same charging time as c oss while v ds is rising from 0 to 80% v dss. calculated continuous current based on maximum allowable junction temperature; for recommended current-handing of the package refer to design tip # 93-4. this is applied to d 2 pak , when mounted on 1" square pcb (fr-4 or g-10 material) . for recommended footprint and soldering techniques refer to application note #an-994. static electrical characteristics @ t j = 25c (unless otherwise specified) parameter min. typ. max. units v (br)dss drain-to-source breakdown voltage 40 ??? ??? v . 0.0 .0 . 1.0 .0 0 a ??? ??? 250 i gss gate-to-source forward leakage ??? ??? 200 na gate-to-source reverse leakage ??? ??? -200 dynamic electrical characteristics @ t j = 25c (unless otherwise specified) q g total gate charge ??? ??? 140 q gs gate-to-source charge ??? ??? 48 nc q gd gate-to-drain ("miller") charge ??? ??? 60 t d(on) turn-on delay time ??? 18 ??? t r rise time ??? 270 ??? t d(off) turn-off delay time ??? 38 ??? ns t f fall time ??? 130 ??? l d internal drain inductance between lead, nh 6mm (0.25in.) l s internal source inductance between lead, and center of die contact c iss input capacitance ??? 6600 ??? c oss output capacitance ??? 1700 ??? c rss reverse transfer capacitance ??? 350 ??? ? = 1.0mhz, see fig.5 c oss output capacitance ??? 6700 ??? c oss output capacitance ??? 1500 ??? c oss eff. effective output capacitance ???1500??? diode characteristics parameter min. typ. max. units i s continuous source current (body diode) a i sm pulsed source current (body diode) v sd diode forward voltage ??? ??? 1.3 v t rr reverse recovery time ??? 63 94 ns q rr reverse recovery charge ??? 170 250 nc t on forward turn-on time intrinsic turn-on time is negligible (turn-on is dominated by ls+ld) r ds(on) static drain-to-source on-resistance v gs = 20v v gs = -20v m v gs = 4.3v, i d = 40a integral reverse p-n junction diode. v ds = 25v, i d = 95a i d = 95a v ds = 32v conditions r d = 0.25 v gs = 0v v ds = 25v v gs = 0v, v ds = 0v to 32v t j = 25c, i s = 95a, v gs = 0v t j = 25c, i f = 95a di/dt = 100a/ s conditions v gs = 0v, i d = 250 a reference to 25c, i d = 1ma v gs = 10v, i d = 95a v ds = v gs , i d = 250 a v ds = 40v, v gs = 0v v ds = 32v, v gs = 0v, t j = 150c v gs = 5.0v,see fig 6 v dd = 20v i d = 95a r g = 2.5 , v gs = 4.5v ??? ??? ??? ??? 4.5 7.5 ??? ??? ??? 160 640 v gs = 0v, v ds = 1.0v, ? =1.0mhz v gs = 0v, v ds = 32v, ? =1.0mhz pf ??? mosfet symbol showing the

www.irf.com 3 qualification information ? 3l-d2 pak msl1 3l-to-262 n/a qualification level automotive (per aec-q101) ?? comments: this part number(s) passed automotive qualification. ir?s industrial and consumer qualification level is granted by extension of the higher automotive level. charged device model class c5(+/- 2000v ) ??? (per aec-q101-005) moisture sensitivity level rohs compliant yes esd machine model class m4(+/- 800v ) ??? (per aec-q101-002) human body model class h2(+/- 4000v ) ??? (per aec-q101-001) ? qualification standards can be found at international rectifier?s web site: http//www.irf.com/ ?? exceptions (if any) to aec-q101 requirements are noted in the qualification report. ??? highest passing voltage

4 www.irf.com fig 4. normalized on-resistance vs. temperature fig 2. typical output characteristics fig 1. typical output characteristics fig 3. typical transfer characteristics 10 100 1000 0.1 1 10 100 20 s pulse width t = 25 c j top bottom vgs 15v 10v 8.0v 7.0v 6.0v 5.5v 5.0v 4.3v v , drain-to-source voltage (v) i , drain-to-source current (a) ds d 4.3v 10 100 1000 0.1 1 10 100 20 s pulse width t = 175 c j top bottom vgs 15v 10v 8.0v 7.0v 6.0v 5.5v 5.0v 4.3v v , drain-to-source voltage (v) i , drain-to-source current (a) ds d 4.3v -60 -40 -20 0 20 40 60 80 100 120 140 160 180 0.0 0.5 1.0 1.5 2.0 2.5 t , junction temperature ( c) r , drain-to-source on resistance (normalized) j ds(on) v = i = gs d 10v 160a 100 1000 4.0 5.0 6.0 7.0 8.0 v = 15v 20 s pulse width ds v , gate-to-source voltage (v) i , drain-to-source current (a) gs d t = 25 c j t = 175 c j

www.irf.com 5 fig 8. maximum safe operating area fig 6. typical gate charge vs. gate-to-source voltage fig 5. typical capacitance vs. drain-to-source voltage fig 7. typical source-drain diode forward voltage 1 10 100 0 2000 4000 6000 8000 10000 v , drain-to-source voltage (v) c, capacitance (pf) ds v c c c = = = = 0v, c c c f = 1mhz + c + c c shorted gs iss gs gd , ds rss gd oss ds gd c iss c oss c rss 0 100 200 300 400 500 0 4 8 12 16 20 q , total gate charge (nc) v , gate-to-source voltage (v) g gs for test circuit see figure i = d 13 95a v = 20v ds v = 32v ds 1 10 100 1000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 v ,source-to-drain voltage (v) i , reverse drain current (a) sd sd v = 0 v gs t = 25 c j t = 175 c j 10 100 1000 10000 1 10 100 operation in this area limited by r ds(on) single pulse t t = 175 c = 25 c j c v , drain-to-source voltage (v) i , drain current (a) i , drain current (a) ds d 10us 100us 1ms 10ms

6 www.irf.com fig 11. maximum effective transient thermal impedance, junction-to-case fig 9. maximum drain current vs. case temperature v ds 90% 10% v gs t d(on) t r t d(off) t f 0.001 0.01 0.1 1 0.00001 0.0001 0.001 0.01 0.1 1 notes: 1. duty factor d = t / t 2. peak t = p x z + t 1 2 j dm thjc c p t t dm 1 2 t , rectangular pulse duration (sec) thermal response (z ) 1 thjc 0.01 0.02 0.05 0.10 0.20 d = 0.50 single pulse (thermal response)
1 0.1 %

+ - 25 50 75 100 125 150 175 0 40 80 120 160 t , case temperature ( c) i , drain current (a) c d limited by package

www.irf.com 7 fig 13b. gate charge test circuit fig 13a. basic gate charge waveform fig 12c. maximum avalanche energy vs. drain current fig 12b. unclamped inductive waveforms fig 12a. unclamped inductive test circuit r g i as 0.01 t p d.u.t l v ds + - v dd driver a 15v 20v t p v (br)dss i as q g q gs q gd v g charge d.u.t. v ds i d i g 3ma v gs .3 f 50k .2 f 12v current regulator same type as d.u.t. current sampling resistors + - 25 50 75 100 125 150 175 0 200 400 600 800 1000 1200 starting t , junction temperature ( c) e , single pulse avalanche energy (mj) j as i d top bottom 39a 67a 95a

8 www.irf.com for n-channel hexfet ? power mosfets

p.w. period di/dt diode recovery dv/dt ripple 5% body diode forward drop re-applied voltage reverse recovery current body diode forward current v gs =10v v dd i sd driver gate drive d.u.t. i sd waveform d.u.t. v ds waveform inductor curent d = p. w . period + - + + + - - - ? ? ?

!"! ? "#$ ? % & ? "#"'( ! )* &)

)&!+ ,-
)"(" .

www.irf.com 9

!"! ##"#$#$ "%&'(

10 www.irf.com to-262 part marking information to-262 package outline ( dimensions are shown in millimeters (inches))

!"! ##"#$#$ "%&'(

www.irf.com 11 !"
dimensions are shown in millimeters (inches) 3 4 4 trr feed direction 1.85 (.073) 1.65 (.065) 1.60 (.063) 1.50 (.059) 4.10 (.161) 3.90 (.153) trl feed direction 10.90 (.429) 10.70 (.421) 16.10 (.634) 15.90 (.626) 1.75 (.069) 1.25 (.049) 11.60 (.457) 11.40 (.449) 15.42 (.609) 15.22 (.601) 4.72 (.136) 4.52 (.178) 24.30 (.957) 23.90 (.941) 0.368 (.0145) 0.342 (.0135) 1.60 (.063) 1.50 (.059) 13.50 (.532) 12.80 (.504) 330.00 (14.173) max. 27.40 (1.079) 23.90 (.941) 60.00 (2.362) min. 30.40 (1.197) max. 26.40 (1.039) 24.40 (.961) notes : 1. comforms to eia-418. 2. controlling dimension: millimeter. 3. dimension measured @ hub. 4. includes flange distortion @ outer edge.

12 www.irf.com ordering information base part package type standard pack complete part number form quantity AUIRL1404L to-262 tube 50 AUIRL1404L auirl1404s d2pak tube 50 auirl1404s tape and reel left 800 auirl1404strl tape and reel right 800 auirl1404strr

www.irf.com 13
unless specifically designated for the automotive market, international rectifier corporation and its subsidiaries (ir) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. part numbers designated with the ?au? prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and process change notification. all products are sold subject to ir?s terms and conditions of sale supplied at the time of order acknowledgment. ir warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with ir?s standard warranty. testing and other quality control techniques are used to the extent ir deems necessary to support this warranty. except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. ir assumes no liability for applications assistance or customer product design. customers are responsible for their products and applications using ir components. to minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards. reproduction of ir information in ir data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. reproduction of this information with alterations is an unfair and deceptive business practice. ir is not responsible or liable for such altered documentation. information of third parties may be subject to additional restrictions. resale of ir products or serviced with statements different from or beyond the parameters stated by ir for that product or service voids all express and any implied warranties for the associated ir product or service and is an unfair and deceptive business practice. ir is not responsible or liable for any such statements. ir products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the ir product could create a situation where personal injury or death may occur. should buyer purchase or use ir products for any such unintended or unauthorized application, buyer shall indemnify and hold international rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ir was negligent regarding the design or manufacture of the product. only products certified as military grade by the defense logistics agency (dla) of the us department of defense, are designed and manufactured to meet dla military specifications required by certain military, aerospace or other applications. buyers acknowledge and agree that any use of ir products not certified by dla as military-grade, in applications requiring military grade products, is solely at the buyer?s own risk and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. ir products are neither designed nor intended for use in automotive applications or environments unless the specific ir products are designated by ir as compliant with iso/ts 16949 requirements and bear a part number including the designation ?au?. buyers acknowledge and agree that, if they use any non-designated products in automotive applications, ir will not be responsible for any failure to meet such requirements. for technical support, please contact ir?s technical assistance center http://www.irf.com/technical-info/ world headquarters: 101 n. sepulveda blvd., el segundo, california 90245 tel: (310) 252-7105

▲Up To Search▲

Price & Availability of AUIRL1404L

	To Download AUIRL1404L Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .